How should steel castings be processed?

There are many things that need to be paid attention to in the processing of steel castings. If you are not careful, it will directly affect the quality of the castings and delay the normal delivery in the later period. How should steel castings be processed?

1. During processing, the steel casting manufacturer needs to find the middle part of the steel casting to ensure that the different sides of the steel casting have a suitable amount of processing.

2. The processing methods of steel castings are generally divided into two types, one is rough processing and the other is finishing. The steel casting manufacturers can choose according to the requirements of users. When rough processing, manufacturers need to pay attention to leaving a certain amount on one side. the remainder.

3. If the bottom of the steel casting needs to be processed, it should be processed as little as possible, as long as the light can be seen. If there is no defect at the bottom, it can be directly processed in place at one time. If there is a margin of about a few millimeters, it needs to be overhauled. finishing.

4. The outer circle, height and size of the finishing need to be controlled according to the deviation of the quantity. If there is a defect in the casting, it can be finished after welding.

5. If there are appearance defects in the production process, it is necessary to repair the appearance of the steel castings. Generally, arc welding or other tools can be used for grinding, which can not only effectively reduce the loss of process flow, but also keep the casting clean and smooth.